Showing 1–18 of 28 results

Quelfire

1.6mm Galvanised Steel Wire 500g (Approx. 31m)

In stock

£9.38 ex VAT
Add to basket
SKU: STEELWIRE
Diameter

1.6mm

Material

Galvanised steel

Pack size

500g coil, approximately 31 metres

Product code

STEELWIRE

Application

Lacing and securing QFFDW foil-faced ductwrap around cables and pipework

25mm dia. Washers (100 units)

In stock

£16.58 ex VAT
Add to basket
SKU: WASHER25MM
Diameter

25mm

Material

Bright zinc plated (BZP) steel

Pack size

100 units

Application

Fitted between the fixing head and the product being installed, with concrete and multipurpose screws

Aluminium Foil Tape 100mm wide x 45m

In stock

£23.16 ex VAT
Add to basket
SKU: FOILTAPE100
Width

100mm

Length

45m

Material

Aluminium foil

Pack size

Single roll

Product code

FOILTAPE100

Application

Taping and finishing foil-faced ductwrap around service penetration seals

Aluminium Foil Tape 50mm wide x 45m

In stock

£14.16 ex VAT
Add to basket
SKU: FOILTAPE
Roll width

50mm

Roll length

45m

Material

Aluminium foil, self-adhesive

Application

Sealing and dressing ductwrap and insulation joints and overlaps

Concrete, Nut Type SA 8x65mm (100 units)

In stock

£69.66 ex VAT
Add to basket
SKU: CSAM8X65
Size

8 x 65mm

Thread

M6

Material

Zinc plated steel

Drill hole diameter

8mm

Clearance hole diameter

9mm

Pack size

100 per pack

Product code

CSAM8X65

Application

Torque controlled anchoring into non-cracked concrete, concrete block and solid brickwork

Foil Faced Rockfibre Ductwrap 40mm thick 45kg/m3 (8m2)

In stock

£222.20 ex VAT
Add to basket
SKU: QFFDW
Product code

QFFDW

Material

Rock fibre with aluminium foil outer facing

Thickness

40mm

Density

45 kg per m3

Pack size

8 m2 per pack, two panels of 4m x 1m

Fire rating

Non-combustible; used to achieve EI performance within tested Quelfire firestopping systems

Application

Wrapping services adjacent to fire seals where an EI rating is required on services with high metallic content

Properties

Non-combustible, water repellent, chemically inert, acoustically absorbent

Hollow Wall SA M6x52mm (100 units)

In stock

£75.68 ex VAT
Add to basket
SKU: HWAM6X52
Size

M6 x 52mm

Board thickness

Suits 12.5 to 15mm plasterboard

Material

Zinc finished steel with pan head screw

Pack size

100 per pack, boxed

Application

Fixing QWR fire collars and similar components to plasterboard walls and ceilings

Hollow Wall SA M6x65mm (100 units)

In stock

£84.08 ex VAT
Add to basket
SKU: HWAM6X65
Size

M6 x 65mm

Board thickness

Suits 25 to 30mm plasterboard

Material

Zinc finished steel with pan head screw

Pack size

100 per pack, boxed

Product code

HWAM6X65

Application

Fixing QWR fire collars and similar components to plasterboard walls and ceilings

Masking tape – 25mm x 50M roll

In stock

£5.96 ex VAT
Add to basket
SKU: MASKINGTAPE25
Width

25mm

Length

50m

Pack size

Single roll

Product code

MASKINGTAPE25

Application

Masking to sealants, coatings and putty pads; removed after application

Masking tape – 50mm x 50M roll

In stock

£7.46 ex VAT
Add to basket
SKU: MASKINGTAPE50
Roll width

50mm

Roll length

50m

Application

Masking and surface protection during sealant, coating and firestopping works

Masonry Screw Pan Torx Drive 6 x 100mm (100 units)

In stock

£39.64 ex VAT
Add to basket
SKU: CONCRETESCREW6X100
Size

6 x 100mm

Head

Pan head

Drive

Torx

Finish

Silver

Pack size

100 per pack

Product code

CONCRETESCREW6X100

Application

Pattress fixing QuelStop Fire Batt to concrete

Multipurpose Screw 6 x 80mm (100 units)

In stock

£22.08 ex VAT
Add to basket
SKU: SCREW6X80
Size

6.0 x 80mm

Head

Countersunk

Drive

Pozi compatible recess with extra deep insert bit recess

Thread

Single thread

Pack size

Box of 100

Product code

SCREW6X80

Application

General fixing across various substrates, used with Quelfire firestopping products per the installation instructions

Quelfire – Intufoam

In stock

Price range: £15.14 through £71.50 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-intufoam
Product code

QI (QI25/30, QI50/30, QI50/45, QI75/45)

Tested to

BS EN 1366-4 for linear gap seals; QI50/45 also tested to BS EN 1366-3 with QuelStop Fire Batt

Gap range

10mm to 75mm depending on product code

Seal width

30mm or 45mm

Length

1 metre lengths

Colour

Black

Composition

Compressible foam impregnated with fire retardant chemicals, bonded to graphite-based intumescent

Application

Vertical and horizontal concrete joints, head-of-wall seals, compartment floor and wall junctions

Installation

Hand compressed, no mechanical fixings

Quelfire Accessories

In stock

Price range: £122.40 through £188.52 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-accessories
Range contents

SG310C sealant gun; SG600F sealant gun; washers for firestopping applications; multipurpose screw; concrete screws and fixings; pigtail screws for fire batt; hollow wall sleeve anchor; concrete sleeve anchor (nut type)

Application (SG310C)

Application of Quelfire 310ml sealant cartridges

Application (SG600F)

Application of QSS acrylic sealant 600ml foils

Application (washers)

Used between the fixing head and the product; suitable for use with concrete and multipurpose screws

Application (concrete screws)

Pattress-fitting the QuelStop Fire Batt to concrete

Application (pigtail screws)

Securing the QWR fire collar to the QuelStop Fire Batt

Application (hollow wall sleeve anchor)

Fixing fire collars to plasterboard walls and ceilings

Application (concrete sleeve anchor)

Anchoring into solid base materials

Quelfire Batts

In stock

Price range: £32.64 through £43.36 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-batts
Product code

QB50

Fire resistance

Up to 2 hours (EI 120)

Tested to

BS EN 1366-3, classified to EN 13501-2

Certification

CE marked; UL-EU certified to EN 13501-2

Board size

1200mm x 600mm x 50mm

Density

140 kg/m3

Application

Flexible walls, rigid walls and floors; cables, cable bunches, cable trays and ladders, non-combustible pipes, and plastic pipes when used with additional Quelfire products

Substrate

Masonry and concrete walls and floors, plasterboard partitions, plasterboard ceilings, steel composite profile decks

Repair coating

QSC QuelStop Ablative Coating reinstates the coating where the batt is cut or damaged

Quelfire CE Marked Fire Collar

In stock

Price range: £9.03 through £368.73 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-ce-marked-fire-collar
Product code

QWR (for example QWR25/CE)

Fire resistance

Up to 4 hours (EI 240), subject to the tested configuration

Tested to

BS EN 1366-3, classified to EN 13501-2

Certification

CE marked; Type X durability classification

Pipe sizes

25, 32, 40, 50, 55, 63, 75, 82, 90, 110, 125 and 160mm diameter

Pipe materials

U-PVC, PE, HDPE, MDPE, ABS, SAN-PVC, PE-X, PP

Application

Concrete and masonry walls and floors, fire-rated flexible partition walls, plasterboard ceilings with timber floors; retrofittable

Material

Stainless steel collar with graphite-based intumescent

Fixing

Secured to QuelStop Fire Batt using Quelfire pigtail screws

Quelfire CE Marked Fire Sleeve

In stock

Price range: £27.02 through £68.62 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-ce-marked-fire-sleeve
Product code

QRS

Fire resistance

Up to 2 hours (EI 120)

Tested to

BS EN 1366-3, classified to EN 13501-2

Certification

CE marked (stated for the rectangular models); Type X durability classification

Duct sizes (rectangular)

QRS110/54 110 x 54mm; QRS205/60 204 x 60mm; QRS220/90 220 x 90mm

Duct sizes (circular)

QRS75 75mm semi-rigid; QRS90, QRS110 and QRS130

Test configuration

Tested uncapped/uncapped (U/U)

Colour

Galvanised steel

Application

Plastic ventilation ducts through masonry walls and insulated or non-insulated plasterboard partitions; retrofittable and cluster-installable

Material

Pressed steel shell with graphite-based intumescent core

Installation

No mechanical fixings required

Quelfire CE Marked Intuwrap

In stock

Price range: £7.44 through £177.30 ex VAT
Select options This product has multiple variants. The options may be chosen on the product page
SKU: GRP-quelfire-ce-marked-intuwrap
Product code

QWW (QWW32/CE to QWW160/CE)

Fire resistance

Up to 4 hours (EI 240)

Tested to

BS EN 1366-3, classified to EN 13501-2

Certification

CE marked; UL-EU certified; Type X durability classification

Pipe sizes

32mm to 160mm diameter, 11 sizes

Pipe materials

PVC, PVC-U, PE, HDPE, MDPE, PP

Length

60mm

Application

Concrete floors, including rigid floors, hollow core floors and steel profile deck composite floors

Substrate

Concrete floors; compatible with QF2 Fire Protection Compound

Colour

Orange polythene cover

Installation

Self-adhesive tab, no mechanical fixings required

See our new featured collections​

Online store of tiles and plumbing. Buy online. Here and now!

I should be incapable of drawing a single stroke at the present moment; and yet I feel that I never was a greater artist than now.

Like these sweet mornings of spring which I enjoy with my whole heart.

When, while the lovely valley teems with vapour around me, and the meridian sun strikes the upper surface of the impenetrable foliage of my trees, and but a few stray gleams steal into the inner sanctuary, I throw myself down among the tall grass by the trickling stream.

A wonderful serenity has taken possession of my entire soul.

Authorities in our business will tell in no uncertain terms that Lorem Ipsum is that huge, huge no no to forswear forever. Not so fast, I'd say, there are some redeeming factors in favor of greeking text, as its use is merely the symptom of a worse problem to take into consideration.

Safe delivery, ensures the movement of goods in a short time.

You begin with a text, you sculpt information, you chisel away what's not needed, you come to the point, make things clear, add value, you're a content person, you like words. Design is no afterthought, far from it, but it comes in a deserved second. Anyway, you still use Lorem Ipsum and rightly so, as it will always have a place in the web workers toolbox, as things happen, not always the way you like it, not always in the preferred order. Even if your less into design and more into content strategy you may find some redeeming value with, wait for it, dummy copy, no less.

Read more