Protecta Sealant & Adhesives
Protecta Sealant & Adhesives Price range: £33.20 through £1,834.80 ex VAT
Back to products
Protecta Ex Mortar
Protecta Ex Mortar Price range: £15.18 through £18.35 ex VAT

Protecta Coatings

SKU: GRP-protecta-coatings

Price range: £43.55 through £140.80 ex VAT

0 People watching this product now!

Fast Shipping

Carrier information

20k products

Payment methods

24/7 Support

Unlimited help desk

Fast Shipping

Track or off orders

Additional information
Range contents

FR Coating; Steel Paint FR-120; Steel Paint FR-1; Interior Paint FR-1; Service Coat FR-1
Fire resistance (FR Coating)

Up to EI 240
Tested to (FR Coating)

EN 1366-1, EN 1366-3, EN 1366-4 and EN 1366-12, with reference to EN 1363-1
Certification (FR Coating)

ETA 22/0307, ETA 22/0733 and ETA 22/0771
Coverage (FR Coating)

Approximately 1.0 to 1.2 litres per square metre
Application temperature (FR Coating)

+5 deg C to +50 deg C; fully cured in 3 to 5 days
Acoustic performance (FR Coating)

Rw 48 to 64 dB
Substrate (FR Coating)

Mineral fibre, specifically Protecta FR Board; also compatible with concrete, masonry, steel, aluminium, timber and gypsum
Composition (FR Coating)

Water-based, halogen-free ablative
Fire resistance (Steel Paint FR-120)

R 120, depending on profile type and Ai/Vs ratio
Tested to (Steel Paint FR-120)

EN 13381-8 and EN 13501-1
Certification (Steel Paint FR-120)

ETA 24/0172, based on EAD 350402-00-1106
Colour (Steel Paint FR-120)

Snow White base; other colours require a compatible topcoat
Application (Steel Paint FR-120)

Spray, roller or brush onto load-bearing steel structures, internal use only
Service life

Minimum 30 years for FR Coating; minimum 12 years for Steel Paint FR-120
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Protecta Coatings”

Your email address will not be published. Required fields are marked *

Description

Protecta’s coating range spans two distinct jobs. FR Coating is a water-based, halogen-free ablative coating developed for mineral fibre firestopping systems, forming a protective layer in a fire that reduces the permeability of the stone wool and blocks flame, heat and smoke. Alongside it sit the intumescent paints, notably Steel Paint FR-120 for load-bearing steel, along with Interior Paint FR-1 and Service Coat FR-1. Because the ablative and the intumescent paints are tested to entirely different standards, the correct product must be matched to the element being protected.

  • FR Coating, up to EI 240, ETA 22/0307, ETA 22/0733 and ETA 22/0771
  • Steel Paint FR-120, R 120 for load-bearing steel, ETA 24/0172
  • Steel Paint FR-1, Interior Paint FR-1 and Service Coat FR-1 complete the range

Technical documents

Quelfire publish the technical data sheet, declaration of performance and safety data sheet for this product on their own site, where the current revision is always shown. Quelfire technical documents

Recently Viewed Products

1.6mm Galvanised Steel Wire 500g (Approx. 31m)

£9.38 ex VAT

2 Hour Fire Rated Enclosure Overbox

Price range: £237.60 through £336.00 ex VAT

25mm dia. Washers (100 units)

£16.58 ex VAT

2hr Fire Rated Access Hatch – FlipFix Metal Door with Picture Frame

Price range: £48.00 through £92.40 ex VAT

2hr Fire Rated Both Sides Metal Double Riser Door Picture Frame Smoke Seals Draught Seals

Price range: £456.00 through £1,170.00 ex VAT

3-2-1 Fire Retardant (Envirograf)

Price range: £23.85 through £425.58 ex VAT